How To Flash Huawei Y3C (Y336-U02) Bootloop Via PC

Here is the download latest Huawei Y3C (Y336-U02) firmware flash file,you might need to do flashing on Huawei Y3C (Y336-U02), flashing process must be done because the bootloop or brick on a smartphone and to resolve the matter by simply renewing the system by means of a firmware update or reinstall.

If you don't know about how to flashing Huawei Y3C (Y336-U02) Stock ROM follow our step by step guide.

How to Flash Huawei Y3C (Y336-U02) Firmware Via PC

Note: keep in mind that before the flash check your battery, it should be 70-80% charged. then back up Your device data including personal data before flashing the firmware or install on your device.

STEP 1: Download and Install Spreadtrum USB Drivers on PC. If already installed than quit this step.

STEP 2: Download Firmware file .pac Stock ROM  which you want to install on Android Smartphone.

STEP 3: Download Spreadtrum Upgrade Tool in PC and extract it and find “UpdgradeDownload.exe” File.

STEP 4: RUN “UpdgradeDownload.exe” to launch the setup, Now connect your smartphone in switched off mode via data cable to PC.

STEP 5: After get connected click on “Load Packed” button, now locate .pac firmware file and add. After adding .pac firmware file click on “Start Downloading Button” to begin flash Procedure.

STEP 6: On successful completing of Flashing procedure the green bar will appears. (Keep in mind during Flashing the device will restart automatically, so don’t do anything during flashing procedure.)

STEP 7: Now confirm firmware upgrade via Go to Setting > About Phone and check firmware.

STEP 8: Done 

Download Link

• Download Huawei Y3C (Y336-U02) Stock Firmware
  (Pass Rar : 12541254)

Share this post