Qmobile M95 GEA 7331 Firmware Flash File Scatter Free Download

Firmware is used for flashing phones or updating mobile old firmware. If you will flash your mobile with its latest firmware, your mobile will restore in its original settings. Flashing of mobile does at those stage if phone is working slow due to its outdated or corrupted firmware. During flashing you will need to follow some important points.

• First of all download the firmware of your phone
• Download and install the latest USB debugging drivers
• Take a backup of your data
• Put your mobile firmware in one specific folder
• Connect your mobile with PC

If you have all above things you can easily flash your mobile via USB data cable. The flashing process will take little bit time to complete.

Before flashing please don't forget to take a backup of your data, otherwise you will lose it and phone will restore in its original settings. You can safely recover your backup data to your phone after successful flashing. If you have started flashing of your phone, still wait for few minutes, because flashing process will take enough time to complete. Now you can download latest firmware of your phone from below download links. The download links are absolutely free and scanned by viruses. If you are facing trouble during download, feel free to contact us.

Download links

Qmobile M95 Flash File Download

How to Flash Qmobile M95 GEA 7331 Firmware Using SP Flashtool

Note: keep in mind that before the flash check your battery, it should be 70-80% charged. then back up Your device data including personal data before flashing the firmware or install on your device.

STEP 1: Run flash_tool.exe.

STEP 2: After SP Flashtool Open, In Scatter Loading file, browse the scatter file contained in Stock rom Folder

STEP 3: Preloader do not check (When Bootloop), If Vibrate Only Please Checked.

STEP 4: Click Download on SP flash Tool

STEP 5: Turn off your Gadget, then remove its battery (when the battery does not need to be removed).

STEP 6: Press and Hold Volume Up Or Vol Down Button (Select which one fits) Then plug the usb into the smartphone.

STEP 7: Let your computer briefly read your smartphone driver for more details see in Device Manager on your computer.

STEP 8: If the driver is already read, then SPFlashtool will be loading with RED color, PURPLE, and YELLOW alternately. Wait until the process is complete.

STEP 9: If the flashing has been completed it will exit the green circle dialog.

STEP 10: Please unplug the usb and plug your battery and then turn it on.

Share this post