How To Flash Stock Rom Using SP Flashtool

These are the installation instructions to Install Stock Firmware Rom using Smart Phone Flash Tool (SP Flash Tool) on Windows PC.

Before Requirements: Your Android Phone should have at-least 70% of battery to perform the Installation Process.

Step By Step Flash Stock Firmware with SP Flash Tool

1. Extract all files you downloaded earlier
2. Download and Install USB drivers on your PC or Laptop.
3. Download SP Flash Tool above, and install it then run it.





4. Click the "Scatter Loading" and locate the scatter file extract the stock rom / firmware earlier.





5. Assign the firmware which will be in form "Android_scatter.txt".





6. Uncheck Preloader.
7. Connect your device to your PC or laptop is turned off.
8. Click Download, and then the flashing process has been running.





9. Make sure the USB driver is properly connected.
10. Wait flasing process until completed.
11. When it is finished it will display a Green circle on Flash Tool.





12. Congratulations you have been successful flash stock firmware and returned as factory default.

Share this post