How To Install Stock Firmware On Vivo X20 Plus PD1710F

Here is an easy way to Install Vivo X20 Plus Stock ROM using QFIL on your Android device. If you have any bootloop or bricked issue on your Vivo X20 Plus, try to fix it by yourself by following this guide.

Bootloop is a situation where your smartphone starts or booting and then stuck only showing the Vivo logo only and then return to boot again. It will never stop until you switch off your phone by press and hold the power button for a while. So, if your Vivo X20 Plus is bootloop, your phone will never show the phone menu. And you can't use your phone to make a call or send any text message to someone.

The following guide will show to fix this issue by flash the new firmware to the Vivo X20 Plus with QFIL software. Just read the instructions carefully to get the best result at your phone flashing.

Vivo X20 Plus Firmware Flash Files

File Name: Vivo_X20_Plus_PD1710F_EX_A_1.6.8_QFIL.zip
Size: 2,1 GB
Download Link: Via Google Drive

---

Vivo X20 Plus Flashtool & Drivers

• Qualcomm USB Driver
• QFIL Tool All Version

How To Flash Vivo X20 Plus Stock Rom:

Note: Keep in mind that prior to flash check out the battery time. It should be 20-40% charged. Backup your device data including personal data before flashing or installing firmware on your device.

• Download Stock Firmware and extract zip or rar file in your PC.
• Download and install Qualcomm driver. While installing driver avoid using cable for successful installation.
• After installation, connect Phone to PC using USB cable.
• While connecting to PC, phone should be switched off and press volume up & down as boot key.
• If it Create Qualcomm  HS-USB QDLoader 9008 port in device manager , then driver has been successfully installed.
• Download the QFIL tool.
• Run QFIL tool.
  
• Click on Browse under the Programmer path to select MBN File.
  
• As soon as the MBN file is selected, Select Build will automatically select the Update or Stock ROM.
• Click on Load XML, select rawprogram_unsparse_without_qcn.xml and then choose Patch0.xml

Load XML comes with two option:

1. rawprogram_unsparse_without_qcn.xml : On choosing this file, data will not be lost.
2. rawprogram_unsparse.xml : Will lose RF Calibration data, IMEI and WiFi/Bluetooth Address.

• Switch off the device and connect it to PC by pressing Volume up & down key.
• Click on Select Port and choose the port.
  
• Click on Download to start flashing.
  
• Unplug USB cable, when Finish Download appears.

Note: Do not unplug cable when Reset Phone or waiting for Reset Phone is in the process.

This is the complete guide about how to flash stock rom vivo x20 plus using qfil,  may be useful for you. if you have questions or you find broken links please ask or leave a comment in the comments field. thanks for visiting.

Share this post